Powerfully Built "Matrix" Frame

A Sturdy, King-sized Beast

New "Matrix" Frame, Ultra Sturdy

Super Rigid Exoskeleton: Stiff top, base, and side pieces die-cast by tough aerospace-grade aluminum alloy.

5mm Thick Aluminum Alloy Heatbed

Precise Steel X-axis Rail

Incredibly Quiet While Printing Hard

By adopting step-servo motors and dynamically balanced fans. It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to. Noise Level at 300mm/s ≤ 45dB* *Data from Creality Lab. Tested with one spool of filament.

Blazing Speed, a New Record

For a large-format machine, 600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s²*.

Active Belt Tensioning

Timing belts may get loose over time, leading to poor print quality and accuracy.
On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of manually Now, belt tensioning is a thing you can forget about.

Automated Filament Cutter & Run-out Sensor

The cutter has a durable steel blade and can be pulled back to position by a magnet, able to sustain constant filament switches. Nearly zero distance from the nozzle. It tells you to replace the filament when only about one inch is left. There will be little waste.

Strain Gauge for Leveling

Highly sensitive for probing the bed. It makes leveling compensation much more precise than sensors embedded in the heatbed.

40mm³/s High-flow Hotend & Clog-free & Quick-swap Nozzle

80W heater, the flow rate of ABS at 280°C can reach 40mm³/s. The tri-metal nozzle curbs heat creep effectively for minimal clogs, and the integrated nozzle design and the magnetic front cover make thee nozzle swap a breeze.

Super Material Master

Actively Heated Chamber: Creating a thermostatic environment up to 60°C. Essential to forge strong prints in ASA, PPA and other high-end materials*. *50°C chamber temperature for PATCH-CF; 60°C chamber temperature for ABS, ASA and PPS.

Phenomenal Print Quality, Every Time

Two Auxiliary Fans Set the Style Right Off

The part cooling airflow is nearly doubled as two auxiliary cooling fans are installed on the left and right sides of the chamber. The shapes and styles of your model will be set before any stringing and warping can happen.

Chamber AI Camera Keeps a Keen Watch

Toolhead AI Camera Tunes the Flow Rate

Toolhead AI Camera Tunes the Flow Rate An AI camera on the toolhead can analyze a test 3D model and then generate an optimal PA value or flow rate percentage value. No more underfeeding and over feeding that degenerate your prints.

Two Z-axis are independently motorized for movement, able to reduce the bed tilt automatically. A strain gauge in the toolhead auto probes the bed and create an accurate leveling mesh. A smooth and neat first layer can be easily delivered without you doing anything.

Smarter Software for a Seamless Workflow

Print out of the Box

K2 Plus is pre-assembled, so you can use it right after unpacking and screen installation. Then a boot-up quick guide covers self-tests such as leveling and fan calibration. Just walk away for a cup of joe. Things will be ready on their own.

Awesome Features Others May Not Offer